|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-06-2017, 09:14 PM
|
#1 | ||
|
Needav8
Join Date: May 2007
Location: Blue Mountains
Posts: 115
|
On an AU3 XR8....
What do these do? I ask because my speedo works fine, but my ECU is throwing a code for the VSS......? Will the VSS effect the engine/tune etc in any way if throwing a code?
__________________
Back in the game with an '02 AUIII manual XR8 
|
||
|
|
|
18-06-2017, 08:08 AM
|
#2 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,375
|
Maybe not - the VSS is used as an input to the PCM and ABS systems as well as providing data to the cluster via CAN bus.
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
18-06-2017, 12:20 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Sth Coast NSW
Posts: 1,512
|
So what is the fault code ??
|
||
|
|
|
|
18-06-2017, 03:03 PM
|
#4 | ||
|
Needav8
Join Date: May 2007
Location: Blue Mountains
Posts: 115
|
I use Forscan and it literally says VSS, not sure what the code number was.
Was throwing a cam posi sensor fault too which I replaced and it went away.
__________________
Back in the game with an '02 AUIII manual XR8
|
||
|
|
|
|
18-06-2017, 03:06 PM
|
#5 | ||
|
Needav8
Join Date: May 2007
Location: Blue Mountains
Posts: 115
|
I use Forscan and it literally says VSS, not sure what the code number was.
Was throwing a cam posi sensor fault too which I replaced and it went away.
__________________
Back in the game with an '02 AUIII manual XR8
|
||
|
|
|
|
18-06-2017, 06:22 PM
|
#6 | ||
|
Needav8
Join Date: May 2007
Location: Blue Mountains
Posts: 115
|
So I got under there today.
There was some oil seepage on the sensor, cleaned it all up then pulled the plug apart, wasn't easy as there was some green corrosion on the pins. Cleaned it all out and put it back together full of RP7 and the VSS fault code is gone...
__________________
Back in the game with an '02 AUIII manual XR8
|
||
|
|
|
|
10-05-2018, 03:50 PM
|
#7 | ||
|
2009 xr turbo,2004 fiesta
Join Date: Oct 2017
Location: Perth wa
Posts: 662
|
Im getting this code on my s3 xr8 too,im assuming its the speedo sender that causes this?
Might have to give mine a clean too,my speedo also works fine. |
||
|
|
|
|
10-05-2018, 04:51 PM
|
#8 | |||
|
Au Falcon = Mr Reliable
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
|
Quote:
cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792 Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007) |
|||
|
|
|
|
11-05-2018, 06:30 PM
|
#9 | ||
|
FG XR50 TURBO
Join Date: Apr 2009
Location: reservoir
Posts: 4,558
|
I think I had the same issue with my AU Fairmont turned out to be a faulty ABS module
as Maka has mention what other codes are you getting ?? https://fordforums.com.au/showthread...le#post6009355 cheers Dean |
||
|
|
|
| This user likes this post: |
VSS - Vehicle Speed Sensor
Linear Mode
