|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
16-12-2018, 06:48 PM | #1 | ||
Starter Motor
Join Date: Dec 2018
Posts: 1
|
Hi,
My wife has a 2011 WS Fiesta Zetec, only done 70000km, just recently she has had the Left Hand Indicators stop working. Front, side mirror and rear. The LH indication on the dash flashes once, and then nothing. No LH Indicators when hazards are on either. Ive done the easy things, removed and checked the bulbs, they are all good, but when they are all removed, Im getting a short circuit across the terminals. Not sure if this is correct. Im thinking its the flasher/relay for the LH side has failed. And I believe its part of the indicator stalk. Has anyone else run across this problem? And if so, have you been able to fix it, and what was the problem, and the fix? Thanks in advance. |
||
19-12-2018, 08:56 AM | #2 | ||
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,375
|
There isn't a flasher / relay for either side as the turn indicators in the Fiesta are controlled by the GEM (General Electronic Module).
The left and right have different ground points but if neither front or rear are working then that is not likely to be the cause. I'd firstly replace (not check) all the LH globes as it's the cheapest check. The next thing would be to check all the connectors, particularly the front ones to ensure no damage to the wiring as you shouldn't see a short with all bulbs removed. Cheers Russ
__________________
Observatio Facta Rotae
|
||