|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
30-08-2022, 10:34 AM | #1 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Posts: 1,110
|
If the car is a factory original and pre 1989, does it have to be "complianced" after arriving for normal registration.
|
||
30-08-2022, 11:07 AM | #2 | ||
Regular Member
Join Date: Apr 2006
Posts: 90
|
Does it have an Australian compliance plate on it and it was it built here and is returning? If not, it will need to have a VASS inspection to confirm it complies with relevant ADR's. If it is earlier than 1/1/1970?(or was it 1969) cars only had vin plates.
|
||
31-08-2022, 07:42 AM | #3 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Posts: 1,110
|
Thanks.....Is the VASS inspection a relatively new requirement for pre 1989 cars?
I imported a couple of cars from USA a few years ago, and they only required RWC's for registration. |
||