|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-02-2012, 07:54 PM
|
#1 | ||
|
[AUT-747]
Join Date: May 2010
Posts: 595
|
hey,
so basically my boot light stopped working today. the only time the boot light works is when i ground it to the car body but this means it doesn't turn off with the boot latch. the only thing i can think of is that the vibration from the subs has broken the latch. any suggestions on how to fix this would be great! cheers |
||
|
|
|
19-02-2012, 01:10 PM
|
#2 | ||
|
Regular Member
Join Date: Jun 2010
Location: Sunshine Coast
Posts: 237
|
I've never looked at one but I assume they work on earth only, hence when you ground it to the body it works, so pull the wire off the button and clean it and the body it touches with sandpapaer or steel wool to give it a good earth.
Also make sure the button is working and not jamming, as in spray it or oil it to free it up. |
||
|
|
|
|
19-02-2012, 02:06 PM
|
#3 | ||
|
[AUT-747]
Join Date: May 2010
Posts: 595
|
you're right they are earth only. i've got no idea where the actual button is, i assume in the lock bit. (confirm??) anybody that can point me in the right direction would be great help, i was even thinking about taking the parcel shelf off and looking at the wiring, but i doubt its the wiring
|
||
|
|
|
|
19-02-2012, 05:59 PM
|
#4 | ||
|
Regular Member
Join Date: Jun 2010
Location: Sunshine Coast
Posts: 237
|
Again assuming, I believe you will find the button somewhere around the hinges.
|
||
|
|
|
|
19-02-2012, 06:09 PM
|
#5 | ||
|
[AUT-747]
Join Date: May 2010
Posts: 595
|
i've looked all on the inside of the hinge and i can't seem to see any button. anybody know where i can find it specifically ?
cheers. |
||
|
|
|
|
19-02-2012, 06:13 PM
|
#6 | ||
|
[AUT-747]
Join Date: May 2010
Posts: 595
|
how hard is it to replace the boot lid latch anyhow ?
|
||
|
|
|
|
18-10-2017, 09:18 AM
|
#8 | |||
|
FPV F6E FG XR8 UTE EL XR6
Join Date: May 2006
Location: Perth
Posts: 664
|
Has anyone else had any luck resolving this issue?
The the OP’s, my boot lamp will not turn on unless earthed to the body. Can’t seem to find the switch either. Had replaced the lock mechanism on the bootlid side to no avail... Any ideas?
__________________
Quote:
|
|||
|
|
|
|
17-07-2024, 10:43 AM
|
#9 | |||
|
FF.Com.Au Hardcore
Join Date: Jul 2010
Posts: 860
|
Quote:
|
|||
|
|
|
|
17-07-2024, 10:48 AM
|
#10 | |||
|
FF.Com.Au Hardcore
Join Date: Jul 2010
Posts: 860
|
Quote:
|
|||
|
|
|
|
22-07-2024, 10:10 AM
|
#11 | |||
|
#neuteredlyfe
  
Join Date: Apr 2012
Posts: 10,658
|
Quote:
|
|||
|
|
au falcon boot light
Linear Mode
