Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 13-11-2024, 02:36 PM   #1
Cowmansam213
Starter Motor
 
Join Date: Nov 2024
Posts: 1
Default AU I Temp gauge reading hot on ignition

I have a 1998 Futura sedan that I am currently preparing for a RWC and my last issue is that my temperature gauge and light shows my engine is hot immediately after ignition. I have replaced my temp sensor, thermostat and flushed my coolant and replaced it but it still shows the same thing and I am lost as to what it might be.

I have only got just under 3 months to finish the car so any help or suggestions would be great.
Cowmansam213 is offline   Reply With Quote Multi-Quote with this Post
Old 13-11-2024, 04:23 PM   #2
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,524
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: AU I Temp gauge reading hot on ignition

This would suggest the wire between the sensor and the ECU has shorted to earth. So follow the wire back checking for any signs of insulation abrasion and shorting especially at the firewall and connectors in the engine bay.
__________________
regards Blue
aussiblue is online now   Reply With Quote Multi-Quote with this Post
Old 13-11-2024, 04:54 PM   #3
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,524
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: AU I Temp gauge reading hot on ignition

The Dark Green with Yellow trace wire I think from looking at https://fordforums.com.au/wsm/wire/a...rt%2024-3.html and https://fordforums.com.au/wsm/wire/a...rt%2024-4.html but my old eyes are having trouble reading those schematics.
__________________
regards Blue
aussiblue is online now   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:35 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL