|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-05-2006, 08:17 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2006
Posts: 8
|
The low beam bulb has blown on the drivers side and i was trying to take it out to put the new globe in but it was a very tight place as the battery was in the way. My question is whether i need to remove the battery out of the way so i can change the globe or can it be done with the battery there?
Any help would be much appreciated, thanks |
||
|
|
|
01-05-2006, 08:21 PM
|
#2 | ||
|
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
leave the battery in
reach in and squeeze the black connector at 3 and 9 oclock pull the connector off then pull of the rubber dust boot then study the clamp that holds the bulb in, dont take it all the way off, just unhinge it at the top and let it lie down inside the headlight remove the bulb and start over ** note the bulb will only go in one way, the larger tag to the bottom iirc..
__________________
|
||
|
|
|
|
01-05-2006, 08:24 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2006
Posts: 8
|
Thank you for your help, much appreciated!
|
||
|
|
|
|
01-05-2006, 08:47 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Posts: 805
|
Just to add to what Racecraft said, sometimes I prefer to remove the battery clamp & sit the battery back onto the carrier, this will gain you @2-3". The H4 plugs don't always release easily, fear not though, the EF/Ls are a REAL pain when it come to changing the H4, the AU ain't nearly as bad.
 :
__________________
Removed by laminge |
||
|
|
|
|
01-05-2006, 09:30 PM
|
#5 | |||
|
Road Terrorist
Join Date: Feb 2006
Location: Sydney
Posts: 35
|
Quote:
|
|||
|
|
|
|
01-05-2006, 10:49 PM
|
#6 | ||
|
Audi S3
Join Date: May 2005
Location: Sydney.
Posts: 8,307
|
when i was doing mine, i got the 5hits and ended up pulling the headlight out LOL!
__________________
|
||
|
|
|
|
02-05-2006, 05:53 AM
|
#7 | ||
|
Just slidin'
Join Date: Sep 2005
Location: Brisvegas
Posts: 7,791
|
Thanks guys. I was going to ask the exact same question.
__________________
MD Mondeo - For the family
NP Pajero - For the adventure |
||
|
|
|
|
03-05-2006, 03:55 PM
|
#8 | ||
|
Barra Turbo > V8
  
Join Date: Jan 2005
Posts: 26,054
|
yeah done it afew times its a pain but patience is a virtue
__________________
-2011 XR6 Turbo Ute - Lux Pack - M6 -2022 Hyundai Tucson Highlander Diesel N Line |
||
|
|
|
|
10-05-2006, 09:14 PM
|
#9 | ||
|
Smokin ya all the way....
Join Date: May 2006
Location: Perth, Western Australia
Posts: 17
|
study the clip. and whatever u do do not try to twist the plug at all:P i made that mistace and sorta broke the globe in the socket, and later on when i worked it out managed to get shards all in the headlight:P oops
but once u got it its like riding a bike..hahahaha...easy
__________________
SmOkIn Ya AlL ThA WaY......
AU Fairmont  D3V1L I6 |
||
|
|
|
Changing the front light globe
Linear Mode
