|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
25-08-2006, 04:41 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Gisborne Victoria
Posts: 2,662
|
I have 1974 Mk2 2 Capri 3 litre Ghia auto and want to get a manual trans complete to convert it. I have been lead understand the trans is not the same as a Mk1. Anyone got any ideas where to start? I am 50k NW of Melbourne.
Help appreaciated Steve |
||
26-08-2006, 08:16 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: Dec 2005
Posts: 556
|
The later mk 1/2/3 had a different gearbox to the early Mk 1s which everyone wants as it has internal linkages. I know of a guy in Sydney with one but he wants $1500 for it.
You are much better off converting to a Supra 5 spd (about $3-500+ dellow bell-housing.) I'm converting my Mk 3 to a 5-speed as the ratios are a lot better....just waiting for a 2nd hand bell-housing to turn up....New ones are quite expensive. |
||
26-08-2006, 10:07 AM | #3 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Gisborne Victoria
Posts: 2,662
|
Thanks mate. Will the supra 5 speed shifter come out in the right spot on the console?
Steve |
||
26-08-2006, 06:38 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Dec 2005
Posts: 556
|
I think you have to trim a little bit out of the hole as the shifter is a little further back. I'm not 100% sure as there are a few different ways of doing the conversion depending on the particular box. I'll have to ask a mate who has done it and get back to you.
|
||