|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
07-02-2008, 02:05 PM | #1 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
On the way home on the motorway, the back end off my car made a sudden vibrating noise and it was slowing my speed down pretty rapidly. Vibration can be felt through the car. Something hitting the tailshaft??
But then it goes and comes back again? Going over bumps doesnt really trigger the vibrating/rubbing.. I had a quick look under there, cant find no grinded marks or anything. I need the ute for work tommorow 5am!! HELP ME PLEASE.. |
||
07-02-2008, 02:18 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Apr 2006
Location: Brisbane
Posts: 1,770
|
check the exhaust... mine basically split in half at the front muffler yesterday afternoon and had similar symptoms....
check the exhaust... push on the tail pipe.. see if the rest of the exhaust work moves in different directions... other than that... now sure.... and also.. mine is a sedan... |
||
07-02-2008, 02:46 PM | #3 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
Just jacked it up for a proper look.
The only things I noticed were.. Tailshaft has about 1-2mm play when in neutral... Oil on the rear seal of the transmission, I know my trans is slowly dying and I did replace that rear seal a year back, but I doubt this is the problem. When the vibration happens nothing cant be felt through the transmission. Also had it running on the jack stands to about 80ks nothing, that was the speed I was doing on the motorway. |
||
07-02-2008, 02:48 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: ACT
Posts: 4,028
|
Uni joints?
|
||
07-02-2008, 02:48 PM | #5 | ||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
Does it do it under throttle, back off, rolling or all 3?
|
||
07-02-2008, 03:07 PM | #6 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
What do you look for when looking at the uni joints Michael??
It does it all 3, GT006. Just went for a drive to investigate and try source the problem, but nothing was a miss. |
||
07-02-2008, 03:22 PM | #7 | ||
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
My god..it sounds like my broken rear wheel studs!! Do you remember when my 5 wheel studs broke clean off?? Take the back wheels off and check them.Is the tailshaft moving alot in the gearbox rear extension housing?
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again |
||
07-02-2008, 03:22 PM | #8 | ||
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
wheel nuts... check them asap..even if it isn't them per say you might have broken a stud or two.. tighten those bad boys up and eliminate them from the equation
__________________
|
||
07-02-2008, 03:36 PM | #9 | ||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
Studs are a good guess, I would also be checking that there is oil in the diff.
|
||
07-02-2008, 03:36 PM | #10 | |||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
Quote:
"Out to check wheel nuts" |
|||
07-02-2008, 03:45 PM | #11 | ||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
Come on, how long does it take?
|
||
07-02-2008, 03:53 PM | #12 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
I can see a pattern emerging, both rear lock nuts are now like rusted and have snapped on me??
Wheel nuts are tight. |
||
07-02-2008, 04:09 PM | #13 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
About 1mm play - in/out, up/down and left/right in stud axles, that is ok isnt it??
Alot of surface rust on them though |
||
07-02-2008, 04:13 PM | #14 | ||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
Do you have that same play on both sides?
|
||
07-02-2008, 04:16 PM | #15 | |||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: ACT
Posts: 4,028
|
Quote:
Soruce: http://autorepair.about.com/cs/doity.../aa102602a.htm |
|||
07-02-2008, 04:26 PM | #16 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
The drivers side (where most of the vibrating is coming from, I think) has abit more play left to right, about 1mm more.
Nope I dont really have any of those symptons above, just the normal noise when you put it into drive etc. What 25-35mph in kph, around 60-70?? |
||
07-02-2008, 04:38 PM | #17 | ||
On The Limiter
Join Date: Jan 2005
Location: Over there
Posts: 173
|
Maybe a axle bearing might have colapsed, take a bit longer to check tho
|
||
07-02-2008, 04:43 PM | #18 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: ACT
Posts: 4,028
|
Try this site for a few more ideas:
http://www.babcox.com/editorial/us/us50126.htm 30mph is 50kph (roughly). |
||
07-02-2008, 04:44 PM | #19 | |||
nou
Join Date: Oct 2007
Posts: 634
|
Quote:
|
|||
07-02-2008, 04:47 PM | #20 | ||
FF.Com.Au Hardcore
Join Date: Mar 2005
Location: Hunter Valley
Posts: 3,184
|
is there an egg in one of your back tyre's
|
||
07-02-2008, 05:13 PM | #21 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
no egg in tyres.
The problem hasnt happened the last 3 drives Ive been You think its ok drive to work tommorow?? then book it in and get it checked?? |
||
07-02-2008, 06:12 PM | #22 | |||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
Quote:
|
|||
07-02-2008, 06:54 PM | #23 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
Havent check the diff yet, never done it before.
Is it just undo the bottom bolt and if it leaks out, there is enough in there- on level ground??? |
||
07-02-2008, 07:06 PM | #24 | ||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
^^ No, there is a bolt on the cover where you would fill it up. Take it off and stick your little finger in there. If you're finger gets wet it has enough.
|
||
07-02-2008, 07:08 PM | #25 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
whoops yeah I meant the filler hole, bottom hole wtf haha
|
||
07-02-2008, 07:24 PM | #26 | ||
Smile
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
|
Right hand side eh? Brake shoes? Wheel bearing? A bolt pieced the tyre? Check the pump up suspension.
__________________
Stingray Car Security ph 0414445444 Single din radio fascias for fg to fgx fords Australia wide . FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/ Site Sponsor See Sponsor Stingray Car Security 😍👌✌ AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again |
||
08-02-2008, 06:47 PM | #27 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: ACT
Posts: 4,028
|
How did it go today? Play up at all???
|
||
08-02-2008, 09:24 PM | #28 | ||
Its Resonating!
Join Date: Jun 2006
Location: Sydney, NSW
Posts: 1,612
|
All was fine no problems at all
Ive come to the conclusion that 1 of he handbrake shoes dislodge and was bouncing around and stuff in there. thanks for helping me out guys |
||