|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-02-2008, 10:50 AM
|
#1 | ||
|
Regular Member
Join Date: Oct 2007
Location: Tathra NSW
Posts: 38
|
Could someone help with info on removal of the tie rod ends please? They are really tight and don't want to damage anything. Cheers Crackers
|
||
|
|
|
04-03-2008, 01:16 PM
|
#2 | ||
|
Starter Motor
Join Date: Mar 2008
Posts: 6
|
Im pretty sure you can just hit the housing of where the tie rod end bolt goes through but dont hit the actual tie rod otherwise you will damage it. Just hit the housing a few times hard after you undo the nut of course but to be safe dont take the nut all the way off just leave it a few threads on so if you miss the housing you wont damage threads. And when takinf the actual tie rod end off the rack ends count how many turns it takes to come off and put them back on the same way this might prevent having to get a wheel alignment afterwards.
|
||
|
|
|
Tie rod end MK 2 1980 van
Linear Mode
