|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-10-2008, 08:10 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2007
Location: perth w.a
Posts: 1,074
|
does anyone konow if a BA auto trans will go into an AU with out any dramas a mate of mines auto is stuffed and he can get a BA box cheap cheers...
|
||
|
|
|
14-10-2008, 08:37 PM
|
#2 | ||
|
Donating Member
 Join Date: Dec 2006
Posts: 5,549
|
There will be dramas
The selector for the gearstick is on the opposite side for a start Not sure on the electronics side, plugs seem the same but i remember hearing they dont work the same I wouldn't recommend it |
||
|
|
|
|
14-10-2008, 09:04 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2007
Location: perth w.a
Posts: 1,074
|
im not worrried about the gear selector thats easy enough to swap over....its the electronics really that im not sure about....
|
||
|
|
|
|
15-10-2008, 02:55 PM
|
#4 | ||
|
Starter Motor
Join Date: Aug 2008
Posts: 20
|
i wanted to put a BF engine/trans setup into my AU SII Fairlane.
I've been told it cant be done due to computer issues. Not too sure if this info is correct however if it is then i doubt you could do it. BA/BF's have their auto's running via the ECU or something simular. So you would probably need to rig up the Auto with your current AU ECU |
||
|
|
|
BA Trans into AU....
Linear Mode
