|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-03-2011, 09:02 AM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2011
Posts: 18
|
Recently bought a Mondeo Zetec TDCI (MB) and read somewhere about installing footwell lights. Well ford do it all for you. They just dont put in the globes. The trick is to locate where the globes go. On the passengers side above the bonnet release catch there is a pale blue connector positioned vertically and on the drivers side located near the centre console is a grey connector that is positioned horizontally. The globes used are the same as those for the number plate lights. Hope this helps. Cheers.
__________________
2010 Ford Mondeo Zetec TDCI Panther Black |
||
|
|
Footwell Lights
Linear Mode
