|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-10-2011, 10:32 PM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2005
Posts: 26
|
Hi All
Replacing a fautly alternator on my series 1 Au S/wagon. All going well till that last 10mm bolt that goes from the power steer pump bracket. Different people tried different socket sets etc till the head rounded  We also tried the top 13mm bolt head with no luck also.Anyway any ideas on how to remove? Was thinking of just cutting the head off but not sure if the bolt will just pull out? Banging on a smaller socket but no reall space to swing a hammer? Cut the bracket? Cheers Mick |
||
|
|
|
25-10-2011, 11:12 PM
|
#2 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,524
|
Breaker bar and Irwin boly extractor from Bunnings:
__________________
regards Blue |
||
|
|
|
|
25-10-2011, 11:33 PM
|
#3 | ||
|
Donating Member
 Join Date: Aug 2006
Posts: 5,142
|
A more available method may be vice-grips. I used a set to remove an air-ratcheted sump bung...
|
||
|
|
|
|
26-10-2011, 12:20 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
if it`s rounded sometimes you can hammer on the next size down socket.
|
||
|
|
|
|
26-10-2011, 03:00 PM
|
#5 | ||
|
Regular Member
Join Date: Jan 2006
Posts: 140
|
Just a little trick try tightening it a little first to break the bond
|
||
|
|
|
|
28-10-2011, 01:11 AM
|
#6 | ||
|
Starter Motor
Join Date: Mar 2005
Posts: 26
|
Hi All
Got the bugger off  Used an Irwin bolt remover socket. Came off really easy. This was after a 'professional' auto electrician tried and said it's stuck and to call in the bolt remover specialist! Cheers Mick |
||
|
|
|
Help: Alternator bolt head stripped ---
Linear Mode
