|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
29-05-2012, 04:44 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2010
Posts: 66
|
Need help, going to replace water pump purchased a Max Ellery manual and it is very unclear on how to remove the belt. It states to fit a 3/8 drive socket to the idler pulley. There is no where that i can see to insert a drive socket as it has a nut on it and does not look like it will move to release tension anyway. The ony thing I can come up with is to put a 15 mm socket on my tensioner and turn it clockwise or anti clockwise is this what I do? It is the only thing that looks like it will move. Any help would be appriciated. any pictures would be great. Pity the manual is not much help The tensioner also has a nut on it.
Thanks |
||
|
|
|
29-05-2012, 05:39 PM
|
#2 | ||
|
Starter Motor
Join Date: Feb 2012
Posts: 22
|
The ony thing I can come up with is to put a 15 mm socket on my tensioner and turn it clockwise or anti clockwise is this what I do?
thats what I do |
||
|
|
|
|
29-05-2012, 06:15 PM
|
#3 | ||
|
Regular Member
Join Date: Jun 2010
Posts: 66
|
Thanks for the reply, do you know if it is clockwise or anti clockwise that you release the tension on the belt ?
|
||
|
|
|
|
29-05-2012, 06:21 PM
|
#4 | ||
|
Starter Motor
Join Date: Feb 2012
Posts: 22
|
Can't remember, just do it one way or the other. The tensioner will swing straight away. Its not tight.
|
||
|
|
|
|
29-05-2012, 06:32 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2007
Location: Brighton, Adelaide
Posts: 3,972
|
on the bottom/lower section of the tensioner, is there a 3/8" square hole?
ba one close?, square hole is on the back http://www.ebay.com.au/itm/2003-FORD...item3a74d079a5 on the 6cyls you turn the ratchet/bar clockwise to release the tension off the belt
__________________
Money Talks, but all i ever hear is it saying Goodbye!! Last edited by my67xr; 29-05-2012 at 06:39 PM. |
||
|
|
|
|
29-05-2012, 06:44 PM
|
#6 | ||
|
Regular Member
Join Date: Jun 2010
Posts: 66
|
no square hole anywhere, only nuts and bolt heads.
|
||
|
|
|
|
29-05-2012, 07:02 PM
|
#7 | ||
|
Starter Motor
Join Date: Feb 2012
Posts: 22
|
see post #2
belt replacement will take less than 1min, its that easy |
||
|
|
|
|
29-05-2012, 10:01 PM
|
#8 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,524
|
It's 15 mm clockwise
__________________
regards Blue |
||
|
|
|
How to remove serpentine drive belt from au 5 litre
Linear Mode
