Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 01-10-2013, 12:19 PM   #1
takkadog
XR6 FANATIC
 
Join Date: Apr 2012
Location: CENTRAL COAST NSW
Posts: 38
Default Fgxr6 tyres

I need new tyres are Kumho KU 31 a good buy OR what do you suggest??

takkadog is offline   Reply With Quote Multi-Quote with this Post
Old 02-10-2013, 09:16 PM   #2
superfly
Go the Hogster!
 
superfly's Avatar
 
Join Date: Sep 2008
Location: Brisbane
Posts: 2,518
Default Re: Fgxr6 tyres

Do a search but I personally really like the KU31's. I had them on my old WRX and my wife still has them on her WRX. But I believe they are about to be discontinued so there's some good deals at present. If you're in Brisbane, I can put you in touch with the dealer.

Otherwise the KU39's are supposed to be really good as well but they're a bit more expensive than the KU31's. I had planned to replace my 18" Dunlops with the KU31 but if they're no longer available when I need them, I will go the KU39's.
__________________
Nitro XR50 - the last brand new one in OZ
first registered Oct 2011.
superfly is offline   Reply With Quote Multi-Quote with this Post
Old 02-10-2013, 10:30 PM   #3
forum@tyretrader
Regular Member
 
Join Date: Sep 2013
Posts: 177
Default Re: Fgxr6 tyres

Ku31 are ok....bit noisy from what some of our customers have said.
Ku39 are not designed for high grip levels though. They are more luxury gt category
depends what you are after and what your budget is
forum@tyretrader is offline   Reply With Quote Multi-Quote with this Post
Old 03-10-2013, 04:54 PM   #4
OzzyTyres
Starter Motor
 
OzzyTyres's Avatar
 
Join Date: May 2013
Posts: 2
Default Re: Fgxr6 tyres

Kumho KU31's are very popular. Depends on your size & budget though.
OzzyTyres is offline   Reply With Quote Multi-Quote with this Post
Old 03-10-2013, 08:19 PM   #5
superfly
Go the Hogster!
 
superfly's Avatar
 
Join Date: Sep 2008
Location: Brisbane
Posts: 2,518
Default Re: Fgxr6 tyres

Are KU31's being phased out? If yes, what's the replacement tyre for these?
__________________
Nitro XR50 - the last brand new one in OZ
first registered Oct 2011.
superfly is offline   Reply With Quote Multi-Quote with this Post
Old 04-10-2013, 08:55 AM   #6
forum@tyretrader
Regular Member
 
Join Date: Sep 2013
Posts: 177
Default Re: Fgxr6 tyres

Quote:
Originally Posted by superfly View Post
Are KU31's being phased out? If yes, what's the replacement tyre for these?
Yes ku31's are getting phased out and replaced by Ku39
forum@tyretrader is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 04-10-2013, 09:09 AM   #7
prydey
Rob
 
prydey's Avatar
 
Join Date: Sep 2006
Location: Woodcroft S.A.
Posts: 21,777
Default Re: Fgxr6 tyres

i paid $170ea for my KU31's (245/40/18) from tempe tyres. i read a lot of the feedback concerning noise and it wasn't conclusive, so i took the chance.

i've done about 7000km on them so far and they are doing the job fine. they aren't noisy yet but the noise is generally related to a wearing/worn tyre.

i don't drive like a tool, so can't comment on how hard they grip if you want to push it in to corners but if you drive normal (like an adult) then they will tick all boxes for the money.
prydey is offline   Reply With Quote Multi-Quote with this Post
Old 04-10-2013, 09:18 AM   #8
FoxtrotGolfXray 5.0
Donating Member
Donating Member3
 
FoxtrotGolfXray 5.0's Avatar
 
Join Date: Mar 2007
Location: Heading thru Hell (Corner)
Posts: 8,367
Technical Contributor: For members who share their technical expertise. - Issue reason: Willingly providing technical info and documents, despite glitches. 
Default Re: Fgxr6 tyres

Check out this folder for lots of relevant information:

http://www.fordforums.com.au/forumdisplay.php?f=103

especially this thread:

http://www.fordforums.com.au/showthread.php?t=11376028

Personally, I would not recommend the KU31s to anyone. I went from Falken ZE912s on the 17" rims to the KU31s on 19" rims and the noise difference was massive. Even had the service guys comment as to how noisy the tyres were on my car when I got it serviced after the changeover.

Sure, the move from the 17s to 19s would have a small part to play in the noise difference, but not the majority of it. That was from the tyres.

Having said that, the KU31s have performed well all round; in the dry, in the wet, and the noise has not changed to any discernible degree now that they have worn a little. I just can't get past the noise they generate.

Edit: just read prydey's reply, and my experience is nothing like his. My KU31s were extremely noisy right from the very start. As I said, I would never go for them again from my experience on the noise front alone, but I have also heard quite a few people have similar experience to prydey.

Hope that helps.

Craig H
__________________
Labels are for jars, not for people.

Life is a journey, not a destination.

~~~~~~~~~~~~~~

Daily: 2013 FGII EcoLPi in Winter White
Play: 2015 FG X XR8 in Emperor Show' N Shine thread

Gone, but not forgotten: 2015 SZII petrol Titanium Territory in Emperor
FoxtrotGolfXray 5.0 is online now   Reply With Quote Multi-Quote with this Post
Old 04-10-2013, 09:24 AM   #9
prydey
Rob
 
prydey's Avatar
 
Join Date: Sep 2006
Location: Woodcroft S.A.
Posts: 21,777
Default Re: Fgxr6 tyres

Quote:
Originally Posted by psychobimbo View Post
Personally, I would not recommend the KU31s to anyone. I went from Falken ZE912s on the 17" rims to the KU31s on 19" rims and the noise difference was massive. Even had the service guys comment as to how noisy the tyres were on my car when I got it serviced after the changeover.

Sure, the move from the 17s to 19s would have a small part to play in the noise difference, but not the majority of it. That was from the tyres.

Having said that, the KU31s have performed well all round; in the dry, in the wet, and the noise has not changed to any discernible degree now that they have worn a little. I just can't get past the noise they generate.

Hope that helps.

Craig H
i also went from the falken ze912's (in 18) to the ku31 and mine are quiet. probably not a lot different to a new falken, but compared to the worn falkens, they are quieter...

so is that just normal variations in tyre construction? or different cars reacting differently? not sure.

all the feedback i read was the same as this. for every 3 people that said they were noisy, there was 1 or 2 that said they were ok.

there is definitely a majority that favour the noisy argument. maybe i got lucky.
prydey is offline   Reply With Quote Multi-Quote with this Post
Old 04-10-2013, 09:52 AM   #10
FoxtrotGolfXray 5.0
Donating Member
Donating Member3
 
FoxtrotGolfXray 5.0's Avatar
 
Join Date: Mar 2007
Location: Heading thru Hell (Corner)
Posts: 8,367
Technical Contributor: For members who share their technical expertise. - Issue reason: Willingly providing technical info and documents, despite glitches. 
Default Re: Fgxr6 tyres

Quote:
Originally Posted by prydey View Post
i also went from the falken ze912's (in 18) to the ku31 and mine are quiet. probably not a lot different to a new falken, but compared to the worn falkens, they are quieter...

so is that just normal variations in tyre construction? or different cars reacting differently? not sure.

all the feedback i read was the same as this. for every 3 people that said they were noisy, there was 1 or 2 that said they were ok.

there is definitely a majority that favour the noisy argument. maybe i got lucky.
Or I just got unlucky

either way, I only put up with it because the 19" rubber is so expensive that I don't want to waste the money I have invested to date. The car's for sale at the moment, so that problem will either disappear when it goes or when the tyres are due for replacement, whichever comes first!

Craig H
__________________
Labels are for jars, not for people.

Life is a journey, not a destination.

~~~~~~~~~~~~~~

Daily: 2013 FGII EcoLPi in Winter White
Play: 2015 FG X XR8 in Emperor Show' N Shine thread

Gone, but not forgotten: 2015 SZII petrol Titanium Territory in Emperor
FoxtrotGolfXray 5.0 is online now   Reply With Quote Multi-Quote with this Post
Old 04-10-2013, 08:55 PM   #11
superfly
Go the Hogster!
 
superfly's Avatar
 
Join Date: Sep 2008
Location: Brisbane
Posts: 2,518
Default Re: Fgxr6 tyres

Quote:
Originally Posted by mark@tyretrader View Post
Yes ku31's are getting phased out and replaced by Ku39
So the KU39 are not as grippy as the KU31's? I had KU31's on my old WRX and loved them. For the money, their wet and dry grip was awesome.

My wife's WRX is in need of new tyres and I'm tying to decide whether or not I should go the KU31's again or the KU39's. Think I might just go with the KU31's as I can get some for less than $90 a corner.

When my XR50 finally needs new tyres, I'll go with the KU39's if they are still around then.
__________________
Nitro XR50 - the last brand new one in OZ
first registered Oct 2011.
superfly is offline   Reply With Quote Multi-Quote with this Post
Old 04-10-2013, 09:02 PM   #12
forum@tyretrader
Regular Member
 
Join Date: Sep 2013
Posts: 177
Default Re: Fgxr6 tyres

That's correct....the ku31 is a higher performance tyre....but will be phased out
forum@tyretrader is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 07:37 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL