|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
21-04-2014, 02:42 PM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2014
Posts: 1
|
hi
my 1992 2.5v6 telstar started stalling,not starting and both thermo fans run when ignition is on on the occasion it did run when thermo fans came on it stalled have replaced fuel filter any other advice would be appreciated |
||
|
|
|
26-04-2014, 04:30 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
the air con cooling fan should come on with the air con on
both fans check fuses and or relays have to check if both fan motors are not burnt out (possible) next if no thermo switch in base of radiator to start them that fan may be controlled through ecu ... bit its not a new model
__________________
My car goes Brumm Brumm |
||
|
|
|
Thermo Fans run when ignition turned on car won't start 2.5 telstar
Linear Mode
