|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
19-04-2018, 12:08 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Jun 2017
Posts: 1,341
|
I was quoted $178 each for Fuelmiser brand O2 sensor from Repco today. I need two as I have a V8 so they expected me to pay $360 for a generic chinese made sensor? I ordered 2 x Bosch 4 pin O2 sensors from an Australian supplier online for a total price of $107 delivered. I refer buying from local businesses but I simply do not earn enough money to throw away $253. Whats the story Repco?
|
||
2 users like this post: |
19-04-2018, 12:13 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Feb 2007
Location: Perth
Posts: 7,290
|
Rip Every Poor C... Off
__________________
jaydee351 4DV8 |
||
20 users like this post: | au350hp, BENT_8, Blue Roo, Bossxr8, costas, eaglem, FGX-351, FTE217, GCRXR6, JC, joolz, Junkyard-Dog, Maka, Paul302351, Paull, Pepscobra, The Yeti, TheGreenKugaaah, Vesper Martini, zipping |
19-04-2018, 12:19 PM | #3 | |||
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,704
|
Quote:
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
|||
6 users like this post: |
19-04-2018, 12:52 PM | #4 | ||
Au Falcon = Mr Reliable
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
|
Repco wont price match anything off Ebay, only physical + online shops afaik but will price match Sparesbox for example which they are both online & have a Ebay store anyway lol.
I did the above & a got a very good discount from my local Repco happily. No way I'll pay full retail when you know cheaper prices are available at the same time, just got to look for them. cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792 Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007) |
||
2 users like this post: |
19-04-2018, 01:00 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Oct 2008
Location: Victoria
Posts: 7,854
|
Its been the same story for years, surprised they are still operating, the company has been sold a few times I believe
__________________
______________________________ 2015 Territory Titanium RWD Diesel - SOLD 2016 BMW X5 xdrive 30D Msport Seadoo Challenger 210SE 310HP |
||
2 users like this post: |
19-04-2018, 01:30 PM | #6 | |||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,318
|
Quote:
__________________
CSGhia |
|||
3 users like this post: |
19-04-2018, 01:41 PM | #7 | ||
Regular Member
Join Date: Jul 2006
Location: Tatura Victoria
Posts: 405
|
Go into my local repco for front hubs for my BF, $120 each "on special".
Got genuine ford hubs a hell of alot cheaper than that, it has always been the same with them. I only go there if I need it urgently. |
||
2 users like this post: |
19-04-2018, 01:50 PM | #8 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Brisbane
Posts: 976
|
I notice that a lot of people buy off e-bay as I do. do you find the new search function a pain in the rear? I cant seem to find anything without a drama now.
__________________
2018 Mustang GT |
||
4 users like this post: |
19-04-2018, 01:55 PM | #9 | ||
FF.Com.Au Hardcore
Join Date: May 2009
Posts: 1,303
|
Fuelmiser items, in my experience, always cost a bucket.
|
||
2 users like this post: |
19-04-2018, 02:44 PM | #10 | |||
T3/Sprint8
Join Date: Jan 2005
Location: Australia
Posts: 16,652
|
Quote:
This group consists of 61 NAPA Distribution Centers in the United States serving approximately 6,000 NAPA AUTO PARTS Stores including 1,000 company owned stores. Clean, modern, organized stores appeal to do-it-yourself retail customers as well as automotive professionals. I'm sure some had noticed in Bris, actually the ol Autobarn in Logan City turned into a NAPA store. and here's the Asia Pacific arm : http://gpcasiapac.com/
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
|||
This user likes this post: |
19-04-2018, 03:34 PM | #11 | ||
Former BTIKD
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
|
Wouldn't be hard as Sparesbox are not cheap
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
|
||
3 users like this post: |
19-04-2018, 03:58 PM | #12 | ||
Au Falcon = Mr Reliable
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
|
I hear you mate, i got my air filter for my AU near 1/2 price though.
For other parts yep true, just depends on whats the going price at the time. cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792 Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007) |
||
This user likes this post: |
19-04-2018, 04:33 PM | #13 | ||
HSV - I just ate one!
Join Date: Dec 2004
Location: Middle of nowhere
Posts: 3,214
|
Believe me, the few repco staff left who still give a damn are getting more and more frustrated by the management incompetence they have to take the heat for....
__________________
I dont care if some prius driving eco-hippy thinks its politically incorrect for me to drive a V8..... I'm paying for the fuel! |
||
This user likes this post: |
19-04-2018, 04:53 PM | #14 | ||
FF.Com.Au Hardcore
Join Date: Jan 2006
Posts: 2,125
|
Yes it’s annoying how everything is double the price at Repco.
The only benefit I see is that they almost always have the part I need in stock. However, if it’s a non urgent part I’ll order elsewhere. If I need it that day I can almost always count on repco. |
||
This user likes this post: |
19-04-2018, 06:25 PM | #15 | |||
FF.Com.Au Hardcore
Join Date: Mar 2014
Posts: 933
|
Quote:
One local joint said ya need to buy the entire motor as they don’t sell the brushes for it separately! Anyway brushes took 20 min to install and she’s a newbie again. Thanks eBay. I couldn’t find the part straight away though either - ended up emailing a place that sold brushes and they sorted what I needed. |
|||
2 users like this post: |
19-04-2018, 06:26 PM | #16 | ||
Regular Member
Join Date: Jul 2008
Posts: 338
|
They should change their name to Ripco.
|
||
This user likes this post: |
19-04-2018, 06:42 PM | #17 | ||
2009 xr turbo,2004 fiesta
Join Date: Oct 2017
Location: Perth wa
Posts: 662
|
They are an emergency sunday parts store when you need parts desperately,other than that they are a deadest rip off,like its been said before,rip every poor c### off
|
||
This user likes this post: |
19-04-2018, 07:05 PM | #18 | ||
FF.Com.Au Hardcore
Join Date: Jun 2017
Posts: 1,341
|
Not wrong there, but so often, what I want is not in stock anyway like today, no boots for the steering rack and the one used on many Falcons is also used on Mazda, Holden & other makes.
|
||
This user likes this post: |
19-04-2018, 07:12 PM | #19 | ||
FF.Com.Au Hardcore
Join Date: Jun 2017
Posts: 1,341
|
I have rarely experienced stock of the parts I have needed & I drive a Falcon which is pretty generic. I have O2 sensors coming in the post, Bosch 4 pin X 2 for $107 delivered or I could have ordered them in through a North Parramatta Repco for $360 for the pair and they had no steering rack boots in stock either. No better next door at SCA, maybe a slight price diff but nil stock as well.
|
||
This user likes this post: |
19-04-2018, 07:23 PM | #20 | |||
Au Falcon = Mr Reliable
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
|
Quote:
The handed my missus normal NGK plugs for a i6 AU Falcon but i had to send her back as they were the wrong ones. cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792 Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007) |
|||
This user likes this post: |
19-04-2018, 07:45 PM | #21 | ||
Drive'n Cruise'n Live'n
Join Date: May 2013
Location: Western Sydney
Posts: 916
|
Rang Repco North Parramatta last sat morn for a NTK oxy sensor for my AU2 I6. Young guy says in stock and $89 as it's on special reduced from $110. They only had the one but it is the same used in the AU V8 Windsor. NTK Part OZA687-D2. I find in that branch all the staff are quite helpful, pleasant and courteous and quite often parts are ex stock or they offer to get them same day or available from another branch. I usually buy when they are on sale but sometimes you got to have them ASAP. Cheers
P.S. I had the boots replaced on the AU2 I6 about 18months ago and no leaks although they told me to keep an eye on it. That was 25k ago and now 176k on the clock. |
||
3 users like this post: |
19-04-2018, 08:03 PM | #22 | ||
FF.Com.Au Hardcore
Join Date: Jan 2006
Posts: 2,125
|
Needed a HSV transmission filter. $136 at REPCO, or $36 online haha
BUT, they did stock it, which most other auto shops didn’t. |
||
This user likes this post: |
19-04-2018, 09:39 PM | #23 | ||
Next upgraded Mk1 Leopard
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,916
|
Mind you I asked my local Suzuki dealer for a price on an O2 sensor for a 2004 Ignis. The guy came back and apologised and said over $400. I got one in 2 days from a guy in WA delivered to my door for $70. If it ain't heavy Ebay is your friend.
UK
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
|
||
2 users like this post: |
19-04-2018, 10:34 PM | #24 | ||
BLUE OVAL INC.
Join Date: Feb 2006
Posts: 8,768
|
I dont go to any of the parts stores unless its just for oil, they either dont have it in stock and want to charge you for freight to get it or the staff are clueless or try to rip you off.
I jump on Ebay and go straight to Adelaide Parts which a Stillwell Ford warehouse outlet and buy genuine for quite often less than in those aftermarket stores. Then i make the 25 minute drive down and get it same day. |
||
2 users like this post: |
20-04-2018, 12:14 AM | #25 | |||
FF.Com.Au Hardcore
Join Date: Jun 2017
Posts: 1,341
|
Quote:
|
|||
This user likes this post: |
20-04-2018, 07:24 AM | #26 | ||
Regular Member
Join Date: May 2012
Posts: 91
|
Had same thing few days ago. Needed territory front drive shaft. $275 from Repco. Checked ebay saw then at $110.
Then rang Bursons and they told me$130. in stock. Walked out out of repco. Told the guy what price they game me and he said might as well go there. Couldnt match it. Best thing was Bursons was only about a 30 sec drive in the same complex. Told the guy at the counter and he says. That's why we got the sale. Sure was. When rrp was $275. Repco didnt even try to knock any off. |
||
2 users like this post: |
20-04-2018, 09:49 AM | #27 | ||
T3/Sprint8
Join Date: Jan 2005
Location: Australia
Posts: 16,652
|
TBH its great there is still options.
Either in store or on the web. I'm no web buyer whatsoever, could be ripping myself off a little but as long as you do your homework shop around I far prefer buying "local" in case of fitment problem/wrong part in box/or a possible WTY issue to occur down the track in these case's I can deal locally etcetcetc.... Price difference is one thing but what of the quality when parts are $100 and more difference. Thats what I find out first up. I'm no repco customer and never have been - deal with other independents but more so at least some behind the counter still have experience compared to so many others lacking today. So as long as your happy its all good but the forum itself is great for help guidance and where to buy.
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
||
3 users like this post: |
20-04-2018, 10:36 AM | #28 | ||
Regular Member
Join Date: Apr 2016
Posts: 133
|
I walked in there once to buy an engine mount for my old Landcruiser. Can't remember the exact figures, but he rang it up and said "That'll be $***.**."
Out of pure shock I said "No it won't." He said "Yeah, alright" and gave it to me for less than half price. They have massive margins and seem to leave plenty of room for discounting if you push them.
__________________
2006 BF RTV 1980 HZJ 60 |
||
2 users like this post: |
20-04-2018, 11:28 AM | #29 | ||
FF.Com.Au Hardcore
Join Date: Jun 2017
Posts: 1,341
|
This extract is taken from the Financial Review March 30 2017.
American car and industrial replacement parts giant Genuine Parts Company is poised to bolster its Australian portfolio with the acquisition of a family-owned original equipment manufacturer. Street Talk can reveal Genuine Parts Company's local arm, GPC Asia Pacific, has agreed to buy Inenco Group which is a supplier of ball bearings, nuts and bolts, pulleys, sprockets and all other sorts of industrial parts. GPC Asia Pacific is expected to take the business off the Sydney-based Martin-Weber family as early as Friday. Sources said GPC had agreed to take a 35 per cent stake in Inenco, with an agreement to acquire the rest of the company in coming years based on future earnings. Greenhill Australia and Allen & Overy advised Inenco. Inenco was founded by the Martin-Webers in the 1950s and has grown to more than 1300 employees across 20-odd different companies and 160 branches, recently moving into Asia. The acquisition is likely to mirror GPC Asia Pacific's other major Australian asset, car parts retailer Repco. GPC Asia Pacific bought Repco in 2013, taking the company from private equity funds advised by CCMP Capital Asia. [Of course Repco was listed on the ASX until February 2007 when CCMP bought the company for about $350 million]. And just as GPC Asia Pacific was attracted to Repco as the market leader in car parts, so too is it keen to take the market leader in the Australian distribution market. Interestingly, Inenco is chaired by Kevin Clark, who was formerly chief executive officer of Alesco Corporation nad run by former Chubb executive Roger Jowett. Martin-Weber family representatives, including Mitchel and Karl Martin Weber, are also on the board, along with former Coates Hire group counsel Andrew Vlachos and Indonesia-based Sammy Hamzah. Genuine Parts Company is listed on the New York Stock Exchange and has a $US13.8 billion ($18 billion) market capitalisation. The company was due to report its first quarter earnings on Thursday night, Australian time. It had $US15.3 billion sales and $US687 million profit in the 2016 financial year. |
||
This user likes this post: |
20-04-2018, 12:52 PM | #30 | ||
T3/Sprint8
Join Date: Jan 2005
Location: Australia
Posts: 16,652
|
Cheers Rooster.
This has been going on, buy outs of resource and local competitors between GPC and Burson Grp for the last 5yrs and more. Look up Bapcor, you''ll be amazed how many local companies they have bought in the Aftermarket industry. This has turned out just as the supermarket duopoly pretty much. Then theres Supercheap doing their thing and we have less and less Independents for between GPC and Burson they have bought out many Independents around the country, if one doesn't sell they open a store up near them.
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
||
2 users like this post: |