|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
27-08-2019, 10:48 AM | #1 | ||
Regular Member
Join Date: Jun 2010
Location: Perth
Posts: 330
|
Hi all,
looking for some advise on how to remove the stains from the under bonnet insulation panel. any advise on products and methods that you have used with success is appreciated
__________________
AU XR8 series II N/A 6 speed manual 426HP 730Nm 1/4 mile: 12.44 sec @ 110.42 MPH Build thread http://www.fordforums.com.au/showthread.php?t=11410574 |
||
27-08-2019, 08:23 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: May 2013
Posts: 541
|
DartAUxr8,
I wouldn’t touch it, the material is so delicate, it will fall apart. Even if you hosed it, it could possibly damage the material. I just took mine off, even removing the tabs has damaged the material. I would look for a good second hand one or after market. Cheers |
||
27-08-2019, 08:44 PM | #4 | ||
#neuteredlyfe
Join Date: Apr 2012
Posts: 10,658
|
I have actually painted one of mine in satin back from a rattle can.
I wiped it down with a damp rag (very gently mind you) firstly then hit with several light coats of paint. Make sure with each coat you come from a different direction. I did it about 6 months ago and it still looks great. Can post some pics tomorrow if need be. |
||
28-08-2019, 12:00 PM | #5 | |||
Regular Member
Join Date: Jun 2010
Location: Perth
Posts: 330
|
Quote:
I think good second hand ones without staining would be a rare find. there is a company in Vic that sells them but nor for XR models. Cheers Shane
__________________
AU XR8 series II N/A 6 speed manual 426HP 730Nm 1/4 mile: 12.44 sec @ 110.42 MPH Build thread http://www.fordforums.com.au/showthread.php?t=11410574 |
|||
This user likes this post: |
28-08-2019, 03:41 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: Apr 2012
Location: Adelaide
Posts: 2,802
|
I agree black vinyl dye it will stay black for a while
Wouldn’t attempt to clean either just keep painting it black for the fresh look
__________________
Current Car: 2002 AUII LTD 408ci Windsor, T6 S488, TH400, 2 Piece Shaft, Helicial LSD 3.23 IRS Daily: 1998 Mitsubishi Super VR-4 Legnum |
||
30-08-2019, 12:21 PM | #7 | ||
#neuteredlyfe
Join Date: Apr 2012
Posts: 10,658
|
|
||
30-08-2019, 08:21 PM | #8 | ||
Next upgraded Mk1 Leopard
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,915
|
Less is more I think.
Let it wear then touch up as needed UK
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
|
||
07-09-2019, 03:25 PM | #9 | ||
Regular Member
Join Date: Jun 2012
Location: Down the track from DARWIN NT(BERRY SPRINGS)
Posts: 46
|
An old detailers trick is to paint them with tyre black.
__________________
Graham South of DARWIN NT AUIII Flash Cab project (nearing completion) |
||
This user likes this post: |