Replacing Blown Globe On AU Gear Selector

[AU2PWR]

Anyone know how to do this , is it Hard >>

[JC]

It's easy, but involved. There are 6 screws you need to undo. I use an 8mm socket screwdriver to undo them (they are hex head bolts/screws). There are two under the front rubber mat thing (under the radio) on the centre console, two under the rubber mat in the drink holder, and one on each side on the floor at the back of the console. Undo all six, then lift up the console - You should not need to remove it to get the bulb out. Twist the bulb holder out, take yout the spade bulb and put in a new one.

[AU2PWR]

cheers JC

All Done

Daniel