Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 10-01-2007, 03:18 PM   #1
bradcad
Regular Member
 
Join Date: Aug 2006
Posts: 72
Default Escort brake pedal trouble

Gday all

Question regarding my grandfathers 1972 esky.

Apart from the rest of the problems I am slowly rectifying, the brake pedal feels loose on the pivot bar. If you follow what I mean.

There is a single bar which holds the brake, accellerator and clutch pedals (from memory). They are all on bushes, but the brake pedal has excessive side to side movement which leads me to believe the bush is worn.

So, anyone experienced this, and any ideas where to get the parts to fix it?

also anyone with a brake booster dead or alive lying around?

Cheers

BRad

bradcad is offline   Reply With Quote Multi-Quote with this Post
Old 10-01-2007, 04:48 PM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

if the pin and pedal parts are worn they should be replaced

if not to serious ... felt washers or flat washers from the plumbing and hard ware dept --- might take up the side to side movement
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 10-01-2007, 05:12 PM   #3
bradcad
Regular Member
 
Join Date: Aug 2006
Posts: 72
Default

Ok thanks. So to replace, I guess second hand is the only way to go, hey?
bradcad is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:52 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL