|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-01-2007, 03:01 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Posts: 784
|
i removed the unichip today ,it wasn't as difficult as i would've thought.i just had to cut and join 3 wires back together and cut 3 where they had been spliced into (see how long my dodgy soldering last)and cut 3 where they joined onto.the reason i pulled it out is that i'm getting a j3 from chiptorque fitted next week and they wanted $100 to pull it out .i'm a bit of a tight ****.
i must say the car feels very sluggish to drive without the unichip.it still revs out alright but yeah,it dosen't feel as good . i'm excited about getting the j3 fitted it will be good to set the cam back to where it should be .i'm going to get the rpm limit raised to 6000rpm as well (i hope it holds together). the unichip is foresale if anyones interested. catch yas ,jake
__________________
au2 s i6 5 spd , au series 1 xr6 hp motor, cam advanced 5*,jmm cai ,topgun leads,pacey 4480's,3 inch cat,lukey 2 1/2 sports zorst and 3.89 lsd,standard ecu. current best,14.939 @ 93.17. |
||
|
|
|
31-01-2007, 04:33 PM
|
#2 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
well done, it will be the best thing you've ever done for the car. I hate Unichips.
__________________
2024 F150 XLT
|
||
|
|
|
|
31-01-2007, 04:48 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
So, whats a J3? where can i check out the specs
|
||
|
|
|
|
31-01-2007, 04:54 PM
|
#4 | |||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
Quote:
I would still go the edit over any of these chips
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
|||
|
|
|
|
31-01-2007, 06:20 PM
|
#5 | ||
|
CRE.87V
Join Date: Jan 2006
Location: Newcastle
Posts: 388
|
wats this chip your selling do? how much u want for it....where u located
|
||
|
|
|
|
31-01-2007, 07:19 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Posts: 784
|
the unichip served its purpose ,not a bad thing at all i cracked a 14.59 with it and a cam and usual mods .you only have to look at loxr6's qter time ,they work .but they can only tune what the ecu can handle.
i chose the j3 over the edit because its going to be a fair bit cheaper and offers all the things the edit will do for me with my car set up the way it is . one thing i didn't get to find out about the edit was,can the edit tune what rpm the bbm opens up at?i haven't asked chiptorque either but i will when i'm down there.
__________________
au2 s i6 5 spd , au series 1 xr6 hp motor, cam advanced 5*,jmm cai ,topgun leads,pacey 4480's,3 inch cat,lukey 2 1/2 sports zorst and 3.89 lsd,standard ecu. current best,14.939 @ 93.17. |
||
|
|
|
|
31-01-2007, 07:21 PM
|
#7 | |||
|
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Posts: 12,083
|
Quote:
__________________
Older, wiser, poorer. Now in Euro-Trash. VW Coupe V6 4motion.
|
|||
|
|
|
removed the unichip
Linear Mode
