|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-10-2006, 06:46 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Glenmore Park, Sydney
Posts: 648
|
Heya all
Have a look at the below pic please. I wanted to know what this is. (im referring to the thing on the roof - no smartass comments please) How much are these to buy from ford (if they can still be bought) How hard are they to fit them  : (does it envolve screwing into the roof ?)Currently my car only have the front bit with the 2 lights, and i would like to get one of these fitted.  : Thanks
__________________
:eclipsee_ MY CAR :eclipsee_
|
||
|
|
|
26-10-2006, 06:49 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2006
Posts: 581
|
Seen them on ebay before and they are standard fitment to the pursuit250. I keep my sunnies up in like its meant but an enterprising person couls fit an lcd screen then it just folds down and away you go.
|
||
|
|
|
|
26-10-2006, 06:53 PM
|
#3 | ||
|
Moderator
  
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
 
|
My XLS ute had it from factory ... I'd say the XRs had them as well in the sedans too.
__________________
The Current Stable 2016 SZII TS Territory RWD Petrol The Evolution of the EGA54D utes AU Workshop Build thread of EGA54D B-Series Workshop Build thread of EGA54D 2004 SX TX Territory AWD - Gone but not forgotten 2010 FG XT "The ex-rental" - Moved onto a new home Mechan1k's Flickr Page |
||
|
|
|
|
26-10-2006, 07:10 PM
|
#4 | ||
|
Next upgraded Mk1 Leopard
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,917
|
My stock AUII has it as well, hmmm.
Uncle Ken
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
 |
||
|
|
|
|
26-10-2006, 07:12 PM
|
#5 | ||
|
FF.Com.Au Hardcore
![ten[A]cio[U]s's Avatar](image.php?s=b75b30a8a7d558676c6fcfa0954af35c&u=10683&dateline=1382916548)
Join Date: Nov 2005
Location: Wagga Wagga
Posts: 2,507
|
My AUI fairmont Doesnt have it but my mum AUII xr6 does.
You could try the wreckers?
__________________
Daily: AU Forte Wagon Project: AU Fairmont - Wants to be turbo The Family Car: 2009 G6E Turbo Future fun: 1968 Ford Galaxie 500 |
||
|
|
|
|
26-10-2006, 07:13 PM
|
#6 | ||
|
Regular Member
Join Date: Jul 2006
Location: Hervey bay
Posts: 82
|
as far as i know they came standard with series 2 onwards (i have one in my sries 2 forte). just look at the wreckers.
|
||
|
|
|
|
26-10-2006, 07:17 PM
|
#7 | ||
|
Resident Nyctophobic!!
Join Date: Sep 2005
Posts: 1,277
|
my XLS doesn't have one...
|
||
|
|
|
|
26-10-2006, 08:13 PM
|
#9 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
i'm pretty sure they screw in from the top, above the roof lining, so you have to pull it out, or at least part of it
|
||
|
|
|
|
26-10-2006, 08:24 PM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Location: Australia
Posts: 1,452
|
I was going to put one in my car, you can get them for around 40 bucks from the wreckers, but apparently it's a PITA to fit, since as stated above you have to pull out the roof lining to install it. It's certainly do-able though if you can be bothered!
|
||
|
|
|
|
26-10-2006, 08:26 PM
|
#11 | ||
|
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
you need the backing plate as well.... That is what it screws in to..
__________________
|
||
|
|
|
|
27-10-2006, 11:51 AM
|
#13 | ||
|
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
They are standard fitment on All AUIIs/AUIIIs. It is a sunglasses holder. It is fragile, prone to breaking and bloody useless. Don't bother. I'd prefer if my car just had the two little lights, BA style.
Interesting story One of the cabbies, clever chap, is a night driver. He found that the two little lights werent bright enough. So he took one of the little inserts that just have the two little lights and switches, and took all of it apart and replaced it with a 21w reverse light bulb and a different rocker switch. lights up the cab like daylight.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
|
|
|
|
27-10-2006, 01:48 PM
|
#14 | ||
|
Built Ford Tough
Join Date: Jan 2005
Location: State of Euphoria Mod: F-Series
Posts: 3,035
|
I've got a sunroof, can't have one. :(
__________________
Black on white '83 SWB F100 C6 auto 351C on gas and on the ground --> Project Thread '55 F100, just a roller at the moment, new project Silver MY12 Volkswagen Amarok |
||
|
|
|
|
27-10-2006, 02:42 PM
|
#16 | ||
|
My kids think I'm cool
Join Date: Jan 2005
Location: Perth, WA
Posts: 7,880
|
The last of the S3 AU's got the squarer BA one- that's what I have in my T3 from factory- they looks heaps better and are the perfect size for an LCD screen if you were that way inclined, but they are fine for your sunnies.........
__________________
2011 FPV GT 335 >My Build Thread< (Posts 3511-3515 has a compilation of most of the pics, page 118 @ 30 posts per page) BLUESTREAK built 5.2L flat-plane-crank VOODOO with 3.2L Intercooled Kenne Bell blower, 1000rwhp/746rwkw @ 8000rpm @ 20psi on E85. Built ZF with BLUESTREAK 2C Circle D converter. Unbloodybelievable... 2018 Ford Ranger RAPTOR 2013 Audi SQ5 |
||
|
|
|
|
27-10-2006, 03:38 PM
|
#17 | ||
|
Formally Kia Chaser
Join Date: May 2005
Location: Newcastle
Posts: 2,493
|
My AU3 Futura doesn't have one, but it might be because I got the Police pack...
I rung Ford Spares cause I wanted one - $300 - I then didn't want a new one....
__________________
Kia Grand Carnival (2006) Silver, Grill Mesh, Tints, Sidesteps (with lights), Towbar, 7" Touch Screen DVD Tuner with intergrated GPS & Bluetooth, Roof Mounted Flip Down 15.1" LCD Screen, Reverse Camera - 184Kw HSV Clubsport R8 VY (2003) Black, 6sp Manual, Coulson Seats, Red on black interior, Pacemaker extractors, Twin 2.5" exhaust, Custom Red 20" VE GTS Rims, Custom Red Stitching
|
||
|
|
|
|
27-10-2006, 04:46 PM
|
#18 | ||
|
XR8 M8
Join Date: Aug 2006
Posts: 218
|
I got the squarer one in my XR
__________________
The King of the jungle doesn't whistle.. he roars!
|
||
|
|
|
|
27-10-2006, 05:01 PM
|
#19 | ||
|
Barra Turbo > V8
 
Join Date: Jan 2005
Posts: 26,297
|
My XR had one but i have never looked at the roof in my TE but im sure is does
__________________
-2011 XR6 Turbo Ute - Lux Pack - M6 -2022 Hyundai Tucson Highlander Diesel N Line |
||
|
|
What is this ? And how do i get one ?
Linear Mode
