|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
28-11-2007, 05:25 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2006
Posts: 784
|
i was just fitting some new leads to my car this afternoon and noticed that lenght of the new leads are different to the ones that were on there.
the leads i already had fitted were topgun lpg leads for an au 2 ,they were already numbered with little numbers on them so i just fitted them to the appropriate cylender. now the new leads i got are just standard topgun leads ,to suit series 2 on.there is 2 long, 2 mid and 2 short.where as the lpg leads i pulled off the car. leads marked 1,3and 4 are the same length and 5 and 6 are the same length(a bit shorter)then number 2 is the shortest. its got me confused. the cars got the series 2 coil pack (pin style).dose anyone know which length lead goes to what cylender? ie; the 2 long ones go to number 1 and 2 cylinders (just an example) i know where they go on the coil pack thanks.
__________________
au2 s i6 5 spd , au series 1 xr6 hp motor, cam advanced 5*,jmm cai ,topgun leads,pacey 4480's,3 inch cat,lukey 2 1/2 sports zorst and 3.89 lsd,standard ecu. current best,14.939 @ 93.17. |
||
|
|
|
28-11-2007, 09:47 PM
|
#2 | ||
|
Miami Pilot
 
Join Date: Jan 2005
Location: ACT
Posts: 21,704
|
Yep - let me consult my book and I'll be right back (Just had the same issue with the old's car).
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
|
28-11-2007, 10:00 PM
|
#3 | ||
|
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,704
|
Can't find the book, so just use the relative lengths of the leads you just took off, and sort the others in the same order, and then fit them in that order. From memory, the length order is 1-6-5-3-2-4. Once you figure out the lengths, write it down in the back of your owners manual for future reference.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
|
|
|
spark plug lead lenght???
Linear Mode
