|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
22-10-2012, 01:50 PM
|
#1 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
My au computer seems to have a gold case/holding bracket holding it in how the **** do I get it off?
|
||
|
|
|
22-10-2012, 02:13 PM
|
#2 | ||
|
Banned
Join Date: Apr 2010
Location: NSW
Posts: 1,424
|
ive always drilled out the pop rivet, and when refitting bracket used various sized washers & a large screw with wide threads to hold it back on.
|
||
|
|
|
|
22-10-2012, 02:48 PM
|
#3 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
I got the bolt up by unscrewing it with a chisel and hammer but the gold bracket extends up into the dash and locks at the back with another gold piece the dash is in the way of moving it forward at the top
|
||
|
|
|
|
22-10-2012, 03:01 PM
|
#4 | ||
|
Banned
Join Date: Apr 2010
Location: NSW
Posts: 1,424
|
geez man i dunno, my 2 AU's had a big gold bracket which is held in by a pop rivet thing on one side, and 2 or 3 vertical hooks on the other side which slot into something
if the pop rivet has been removed, then lift the bracket upwards to release the hooks |
||
|
|
|
|
22-10-2012, 04:44 PM
|
#5 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
Haha ah yes the upwards motion of the bracket that I didn't try all done now lmao what an idiot
|
||
|
|
|
|
22-10-2012, 06:02 PM
|
#6 | ||
|
Rob
Join Date: Jan 2010
Location: VN Capital
Posts: 1,584
|
the brackets are different between series 1 and 2/3 im pretty sure, me and a mate used an angle grinder and took the head off then used a screw when we were done instead.
__________________
99 liquid silver AU Classic -Sold
Supercharged Nissan 350z 280rwkw Blueprint series 3 AU V8 manual |
||
|
|
|
|
22-10-2012, 06:35 PM
|
#7 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
Mine was actually a sheer bolt where the head comes off once it's tightened up Looks like a rivet to when the heads off a hammer and chisel and it unscrews
|
||
|
|
|
|
22-10-2012, 10:01 PM
|
#8 | ||
|
Sales Representative
Join Date: Mar 2007
Location: Young
Posts: 5,314
|
You can always do what James22 and I did... :P
__________________
Project InfernoSR - Back Burner Project FeralTerra - No longer Project Fairmont Prodigy - Sold Thanks go to: MY WIFE! Bathurst Brakepro Undacar eBay!! |
||
|
|
|
Au computer bracket
Linear Mode
