|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-03-2015, 07:02 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2012
Location: Down the track from DARWIN NT(BERRY SPRINGS)
Posts: 46
|
I tried search, but had no luck. What I need to know is what is compatible between the series, my AU wagon is an ex taxi with a worn out interior and a 10 litre petrol tank (No joke).
I can get a series 1 for next to nothing, but don't want to get it if nothing will fit. TIA
__________________
Graham South of DARWIN NT AUIII Flash Cab project (nearing completion) |
||
|
|
|
02-03-2015, 08:49 PM
|
#2 | ||
|
Guest
Join Date: May 2013
Posts: 1,934
|
AU is series 1.
Everything is basically the same across all 3. It's mainly the dash , door skins, colours & fabrics that changed, but by appearance only, not their dimensions. If you can get a cheapy for parts then go for it. |
||
|
|
|
| This user likes this post: |
|
02-03-2015, 11:48 PM
|
#3 | ||
|
Regular Member
Join Date: Jun 2012
Location: Down the track from DARWIN NT(BERRY SPRINGS)
Posts: 46
|
The price is only 1 or 2 hundred, but the wagon is driveable just needs an auto service. I would prefer not to wreck one that could be a bargain driver for some one else.
__________________
Graham South of DARWIN NT AUIII Flash Cab project (nearing completion) |
||
|
|
|
|
03-03-2015, 03:45 PM
|
#4 | |||
|
Guest
Join Date: May 2013
Posts: 1,934
|
Quote:
|
|||
|
|
|
| This user likes this post: |
|
11-04-2015, 05:22 PM
|
#5 | ||
|
Regular Member
Join Date: Jun 2012
Location: Down the track from DARWIN NT(BERRY SPRINGS)
Posts: 46
|
I didn't end up taking the wagon as it was in a worse state than mine.
However I have just picked up a series 1 XR6 for the amazing price about 10 litres of diesel in the Prado to collect it, the only thing missing is the cylinder head. It was an abandoned vehicle at the local Army base, too much hassel to re register it, so looks like all the good bits will be going on my FlashCab.
__________________
Graham South of DARWIN NT AUIII Flash Cab project (nearing completion) |
||
|
|
|
| This user likes this post: |
Compatibility Series 1 to Series 3
Linear Mode
