heating problems

[zippy450]

ok guys just so advice. with my AU S1 the heat is stuck half on. it is pushin it through the floor vents normally and cause the A/C not to work correctly. if anyone could help it would be great

..... Zippy

[JC]

It will be the cable clip at the back of the heater controls, if it's just blowing warm even though the rotary dial says cold. You will need to remove the radio, and the facia to get to it. A cable tie in the right spot should hold the cable in place.

If it's the bit that adjusts the window/vents/floor controls, then these are all vacuum hoses - perhaps one of them has come off or split? Still to need to remove the controls as above to have a look at it.